PROCESS CLEANING RAMPS
Steps to be followed:
Step 1: Make a plan to determine the position and order of the area to be cleaned, put up warning signs.
Step 2: Clean rough, dust all ram slots in the intended scrubbing area, manually clean chengum marks and foreign objects (cannot be machine removed). Check the spider webs on the ceiling Ram if any will clean the ceiling Ram first.
Step 3: Sanitize satellites, choose the appropriate plan for satellite cleaning. Use two dedicated scrubber machines, one Ram down scrubber, one Ram up scrubber. Drain cleaning solution and scrub thoroughly to brighten floor evenly in all areas.
Step 4: Using two dedicated vacuums, one will suck water and sediment on the Ram surface. The other machine focuses on absorbing dirt in the slots. Sweep smoothly behind the two scrubbers, using the super clean mop to thoroughly clean up the remaining dirt.
Step 5: Complete the cleaning of Ram, check all the construction sites, clean the machinery and pour dirty water at the right place, return the status of dry, clean, non-slip condition.
Step 6: Notify the Management Board for acceptance 30 minutes before handover.
CÔNG TY TNHH TM DV VỆ SINH NAM THÀNH ĐÔ